
You are choosing an SQE course when you see a striking pass-rate claim. Another page quotes a lower figure from an official assessment report. A study group then shares a screenshot suggesting that the latest sitting was unusually difficult. Which number should influence your decision?
Possibly all of them, but not before you understand what each measures. A percentage might describe first-time candidates, people resitting one assessment, survey respondents or a selected group who completed a preparation programme. Those are different populations, even when the headline says simply “SQE pass rate”.
For candidates pursuing solicitor qualification in England and Wales, the useful question is not just how many people passed. It is whether the evidence supports the conclusion being drawn. This guide deliberately avoids quoting an unverified “latest” percentage. Instead, it gives you a practical method for checking official reports, assessing course claims and turning results data into a sensible preparation plan.
1. Define the SQE pass rate before judging the headline
A pass rate is the number of successful candidates divided by the relevant candidate population, expressed as a percentage. The arithmetic is straightforward. The definition of the population is where misunderstandings begin.
Start with the original assessment report, not a search-result summary or a cropped chart. Use the official SQE website and the Solicitors Regulation Authority website to locate assessment results and supporting publications. Check both the assessment date and the publication date: a recently published article may describe an older sitting.
Before copying a percentage into your notes, record these details:
- Assessment: does it concern SQE1, FLK1, FLK2 or SQE2?
- Sitting: which assessment window does the figure cover?
- Attempt status: does it cover first attempts, resits or both?
- Population: who is included, and who is excluded?
- Source: is it an official result, a course survey or an individual account?
SQE1 requires candidates to pass both FLK1 and FLK2. A pass rate for one assessment is therefore not automatically a pass rate for SQE1 as a whole. Nor can you calculate the proportion passing both by averaging the two individual pass rates. You need information about the candidates who passed each assessment and the overlap between those groups.
A percentage becomes useful only when you can finish this sentence: “This is the proportion of these candidates who passed this assessment during this period.”
I would rather see a candidate keep one properly labelled figure than collect ten screenshots with missing context. Add the report title and relevant table or page to your notes so that you can check the wording later.
2. Check SQE1 and SQE2 course claims for missing candidates
Course pass-rate claims require an additional question: how were the results collected? An official assessment outcome and a voluntary customer survey are not interchangeable forms of evidence.
Consider a purely hypothetical example. A course enrols 100 candidates. After the assessment, 40 answer a results survey, and 36 respondents report passing. The pass rate among respondents is 90%. That does not establish a 90% pass rate among everyone enrolled.
The other 60 candidates might have passed, failed, deferred or not attempted the assessment. Without that information, the overall outcome remains unknown. Equally, it would be wrong to treat every non-respondent as having failed. Missing information supports neither conclusion.
Ask for the following before relying on a headline claim:
- The number of candidates behind the percentage.
- The number eligible to be included and the number who supplied results.
- Whether outcomes were independently verified or self-reported.
- Whether candidates had to complete particular tasks to enter the reported group.
- Whether the figure covers one sitting or combines several assessment windows.
- Whether first attempts and resits are reported separately.
A claim restricted to candidates who completed every mock may describe that group accurately. However, it does not tell you what happened to all enrolled candidates. Completion may also reflect available study time, prior knowledge or engagement, rather than the effect of the course alone.
Look at the group size as well. In a hypothetical group of ten candidates, one person's outcome changes the pass rate by ten percentage points. A dramatic-looking difference between two small groups may therefore represent very few people.
Your action is simple: request the definition and collection method in writing. If the information is unavailable, label the claim not sufficiently explained for comparison. You do not need to accuse anyone of inaccuracy to decide that a number is unsuitable for your decision.
3. Compare SQE1 and SQE2 cohorts, not isolated percentages
A change between sittings can be real without proving that one examination was easier. Different groups sit assessments at different times. Their previous legal study, work experience, preparation, attempt history and personal circumstances may differ.
This is why comparing a first-attempt figure with an all-candidate figure can mislead. The latter may include resitters, and the balance between first attempts and resits may change. Even a correctly calculated overall rate can conceal differences within the population.
The same caution applies when comparing SQE1 with SQE2. These are different assessments taken by different candidate populations. SQE2 candidates generally reach that stage after passing SQE1, although exemptions can affect the route. A higher published percentage for one stage would not, by itself, show that it is easier for a particular candidate.
Use a small comparison table before drawing a conclusion:
| Comparison check | What to establish |
|---|---|
| Same assessment | Compare FLK1 with FLK1, rather than an individual assessment with an overall outcome. |
| Same attempt category | Keep first attempts and resits separate where the report allows. |
| Comparable collection | Do not treat survey responses as equivalent to complete official results. |
| Relevant assessment context | Read any accompanying explanation of format, reporting or methodological changes. |
Official reports may also describe outcomes by candidate characteristics. Read these as group-level observations, not personal forecasts. An association does not establish why a difference exists, and a group average does not determine an individual's result.
Would you really choose an assessment date because a previous cohort achieved a higher percentage? Your readiness, available preparation time and current assessment requirements are more useful decision factors than trying to identify a supposedly favourable sitting.
4. Separate SQE pass rates, pass marks and mock scores
These three measures answer different questions. A pass rate describes the proportion of a defined group that passed. A pass mark is the threshold used to determine success in the relevant assessment. A mock score records your performance on a particular practice exercise.
Do not use one as a substitute for another. If an assessment has a certain pass rate, that does not mean candidates needed that same percentage of marks to pass. Nor does your practice percentage directly establish your probability of success.
The SQE is designed to assess competence against the required standard, rather than allocate a fixed number of passes. When reading results, consult the official explanation of standard setting and score reporting. Where scaled scores appear, do not assume they are raw percentages of questions answered correctly.
Mock results need their own context. A familiar question bank completed untimed and with notes open measures something different from an unseen assessment completed under time pressure. Repeated questions can produce higher scores through recognition without showing that you can apply the rule to new facts.
For SQE1, practise in conditions that reflect the current specification. Each paper has 170 Single Best Answer MCQs, divided into two sessions of 85 questions. Each session lasts 2 hours 33 minutes, giving about 1.8 minutes per question.
From the January 2027 sitting, questions are grouped by session. Check the official subject allocation when building full-session practice, rather than assuming every subject can appear in either session. Ethics remains pervasive.
For SQE2, track performance against the assessment criteria across legal knowledge and the assessed skills. A strong piece of legal writing does not establish readiness for advocacy or client interviewing. Review completed work, identify the specific weakness and repeat the task under appropriate conditions. There is no reliable conversion from one practice result into a personal pass probability.
5. Turn SQE1 and SQE2 results into preparation decisions
Pass-rate research should end with an action, not another hour of searching. Once you understand the relevant report, shift attention to evidence you can produce about your own preparation.
For SQE1, complete an unseen, timed diagnostic covering the relevant subjects. Classify each error: missing legal knowledge, confusion between similar rules, failure to identify a decisive fact, misreading the question or insufficient time. Record correct answers reached by guessing too; they can conceal uncertainty.
Then choose a response that matches the problem. Revisit the rule if knowledge is missing. Compare closely related principles if you keep selecting a plausible but inferior answer. Practise shorter timed sets if pace deteriorates. Simply answering more questions is not always the remedy.
For SQE2, use feedback to identify whether the difficulty concerns legal accuracy, application, structure, professional judgement or delivery. Repeat a comparable task after addressing that weakness. Keep the original and revised work so that improvement is visible rather than assumed.
When choosing support, turn the same approach into practical questions:
- Does the teaching address the gaps shown by your diagnostic work?
- How is feedback provided, and will you have time to use it?
- Are practice materials aligned with the current assessment specification?
- Can the timetable fit around your employment and other commitments?
- Is the course scope and price clear without relying on a headline success claim?
Use population data to understand the assessment. Use repeated, representative practice and specific feedback to judge your preparation.
If you are resitting, start with your own result information and the current rules governing your next attempt. An aggregate resit percentage cannot explain your individual outcome. Build a revised plan around identifiable weaknesses rather than repeating the previous timetable unchanged.
Set a review date and decide what evidence you want by then: better accuracy on unseen questions, fewer timing problems or stronger assessed work. That gives you a meaningful progress check without pretending that any preparation measure guarantees a pass.
How CELE SQE can help
CELE SQE (celebar.com) offers SQE1 Courses (FLK1 + FLK2): Long-term Course: £3,720; Mid-term Course: £2,750; Short-term Course: £1,750. The SQE2 Course: £1,450, includes 61 full mock questions built 1:1 to the official SRA format. If you would like to discuss which option fits your preparation needs, contact WeChat SQE100 or [email protected], or visit celebar.com.



